Pallet size: 36 units
Purchase quantity: can be produced from 1 unit up
Thickness: 19,5 mm (+/- 0,6 mm) (other thicknesses on request)
A/B = structured on one side/back side smooth
Front side = A
Back side = B – Inner side quality
sliced veneer top layers joined in solid character
Scope of Application
furniture industry (fronts, visible sides, front filling panels, cover material etc.) & interior design (wall- and ceiling panelling, sliding door elements, interior doors, door skins etc.)
V20 particle board
(other carriers on request)
Sliced veneer top layers 0.6 – 1.5 mm; standard 0.9mm (varies depending on type of wood)
The Structure Boards can be easily cut with sharp hard-metal saw blades. The use of a scorer is not absolutely necessary, but is recommended. However it is to be ensured that cutting is not performed at excessive feed speeds.
When milling and profiling one should use tools with hard-metal tips.
For drilled holes the tools and machines commonly used for machining wood materials can be used.
To achieve a machinable surface, light brushing (plastic) or rubbing with “Scotch-Brite” is recommended to remove any glue residues that can occur through the embossing process. The Structure Board is then ready for oiling or lacquering. The exact processing instructions of the respective oil or lacquer manufacturer are to be observed.
Rough cut surfaces should be oiled, lacquered or edged. For this it is possible to obtain edges matching the respective top surface from our assortment. The standard thickness is 2.2 mm, other thicknesses are possible on request.
Diverse specifications in this data sheet are based on tests that we our-selves have performed and on our own experience. However they cannot cover all parameters to be considered in the respective case of application and are therefore non-binding. The specifications represent neither a quality guarantee in the legal sense, nor an assurance of characteristics. No legal claims can be derived from these specifications. Deviations in colour and structure are not grounds for complaint, as real wood veneer is a product of nature. Complaints due to technical defects will be accepted within 10 days.